Standard Configuration

va-Q-vip F

va-Q-vip F is a microporous insulation material based on fumed silica. The vacuum insulation panel is approved for general construction purposes in accordance with approval number ETA-17/0926 of the "Deutsches Institut für Bautechnik (DIBt)". va-Q-vip F elements are unique, because of their rectangular edges and corners (va-Q-seam) whereas individual elements can be joined together almost seamlessly. In general rectangular panels are produced, but various shapes (trapeze, triangle, corner section) are possible on request. The va-Q-vip F can be used in buildings according to the application areas DAD, DAA, DZ, DI, DEO, WAB, WH and WI after DIN 4108-10, table 1 (floors, flat roofs, ceilings, top floor ceilings, exterior insulation behind panelling, walls, insulation in wood frame construction). Hereby our application-specific, laminated versions va-Q-vip F XPS and va-Q-vip F GGM are obtainable which are approved for general construction purposes in accordance with approval number Z-23.11-1658.

va-Q-vip F is a microporous insulation material based on fumed silica. The vacuum insulation panel is approved for general construction purposes in accordance with approval number ETA-17/0926 of the "Deutsches Institut für Bautechnik (DIBt)". va-Q-vip F elements are unique, because of their rectangular edges and corners (va-Q-seam) whereas individual elements can be joined together almost seamlessly. In general rectangular panels are produced, but various shapes (trapeze, triangle, corner section) are possible on request. The va-Q-vip F can be used in buildings according to the application areas DAD, DAA, DZ, DI, DEO, WAB, WH and WI after DIN 4108-10, table 1 (floors, flat roofs, ceilings, top floor ceilings, exterior insulation behind panelling, walls, insulation in wood frame construction). Hereby our application-specific, laminated versions va-Q-vip F XPS and va-Q-vip F GGM are obtainable which are approved for general construction purposes in accordance with approval number Z-23.11-1658.

Advantages of va-Q-vip F

Enhanced usable room area due to thinner insulation material
Smooth edges and no foil overlaps due to patented va-Q-seam technology
Various standard sizes on stock
Approved for general construction purposes according to Z-23.11-1658 and ETA-17/0926
Long lifetime due to optimized panel design
100 % quality control with the patented gas pressure measurement system (va-Q-check)
Sustainable product (recyclable core material)

Technical Data

Thermal Conductvity @10°C
[W/(m*K)]
< 0.0043 (thickness ≥ 15mm)
Thermal Conductvity @10°CThermal Conductvity Design ValueDensityMinimum Dimensions (l x w)Maximum Dimensions (l x w)Thickness
[W/(m*K)][W/(m*K)][kg/m³][mm][mm][mm]
< 0.0043 (thickness ≥ 15mm)< 0.008 (thickness < 20 mm)180 - 250250 x 3001000 x 60010 - 60
< 0.007 (thickness ≥ 20 mm)